Eliminate dry starts on fresh engine rebuilds with this prelube engine oiler from Silver Seal. This prelube tank is a must have tool when rebuilding engines and is ideal for priming your entire engine oil system before starting. This oiler helps eliminate premature wear that could be caused during dry starts. This universal tank can be used on any engine application.
Includes 3 common adapter including the 16mm ls adapter.
Pre-Lube Engine Oiler Instructions For Use:
1. Locate the oil pressure outlet on engine block.
2. Assemble proper size brass adaptor to oil pressure outlet.
3. Connect outlet hose to brass adaptor.
4. Before pressurizing tank, be sure to remove the rocker arm valve covers so you may observe oil flow during the pre-lube operation.
5. Turn plug valve to OFF.
6. Pressurize tank to a maximum of 75 psi.
7. Turn ON plug valve and hold ON for about 3 seconds or until oil flow may be observed from the rocker arm shaft assembly.
8. Turn OFF plug valve, disassemble hose and adaptor from the engine block.
9. Pull pressure release valve ring to release all air from tank.
10. After ALL air has been release from tank, the filler dip stick cap may then be easily removed.